Low Noise Ride On Floor Scrubber Dryer With Cylindrical Brush Models
Ride On Floor Scrubber Dryer Introduction
Ride On Floor Scrubber Dryer provides its customers with most reliable, highest quality of hard floor cleaning in all kinds of environments. It is ideal for use on large hard surfaces.
- Easy to use, simple to maintain and productivity of 3600 m2 per hour
- With the cylindrical brush models, small solid debris such as screws, bolts, cigarette butts and so on can be removed from the floor.
- Recovery tank is equipped with a foam suppression device to protect the vacuum motor from being damaged due to excessive foam.
- With large battery compartment, batteries installation and maintenance becomes quite simple.
- Low noise level enables daytime cleaning, even in noise sensitive locations.
- The tanks Constructed with a tough rote mold polyethylene body. This material is very resistant to chemical solutions and offers excellent tightness reliability over time while also being very resistant to temperature variations.
Ride On Floor Scrubber Dryer Features
- 910mm cleaning width +1100 squeegee + strong digital motor rear wheel drive, so that the machine not only has super power, but also has almost original rotation control pklerformance.
- Brush and suction motor have current and temperature protection, which can avoid possible faults and effectively improve the service life of the motor.
- The steel arc squeegee + high quality rubber, so that the suction effect of the machine can be more reliable compared with the brand machine.
- Automatic lifting brush system + clear water outlet linkage control, automatic control with machine walking, without complex operation, "one button button" is completed.
- One D9 can have 3 Mini ride on floor scrubber efficiency, which can bring more space for owners.
- One charge can work for >4 hours to meet the basic cleaning requirements.
- 1100 squeegee,it can effectively complete the scraping water absorption work of the machine, and can effectively pass the general elevator even if the squeegee is not removed.
- American rubber,shows perfect water-scraping performance and wear-resisting characteristics. Good steel and toughness are longer than ordinary rubber , and the effect is better;
- The machine is equipped with a 24V/200AH battery pack, which can work for >4 hours on a single charge;
Ride On Floor Scrubber Dryer Parameter
| model | D9 Low Noise Ride On Floor Scrubber Dryer With Cylindrical Brush Models |
| brush dia(mm) | 910(2*457)(18'*2) |
| solutio tank(L) | 150 |
| brush driving mode | Rear wheel differential drive |
| brush motor(w) | 500*2 |
| traction motor(w) | 750 |
| efficiency(m2/h) | 5200 |
| installed power | 24v |
| addtional pressure for brush | - |
| dirty water level sensor | yes |
| solution level checking hose | yes |
| on board charge | optional |
| squeegee width(mm) | 1100 |
| recovery tank(L) | 180 |
| Capacity(L) | 155 |
| brush speed(rpm) | 150 |
| suction motor(w) | 550 |
| driving system | driving |
| battery(max)(v/ah) | 6V*4 200AH 3HR |
| one key control | yes |
| driving speed adjust | - |
| electromagetic valve device | optional |
| dimension(mm) | 1640*900*1430 |
| Packing Dimension(mm) | 1780*1060*1600 |
| GW(KG) | 367 |
| NW(KG) | 392 |
Ride On Floor Scrubber Dryer application
This model is suitable for large and medium-sized venues, such as indoor parking lots, factory workshops, warehouses, railway stations, public stadiums, commercial complexes, airports, etc.
Ride On Floor Scrubber Dryer Deatils
